Loading... Please wait...
  • Image 1
  • Image 2

1.5 GPM Low Flow Shower Head

0.50 LBS
Free USA Shipping on orders over $50
$5.95 Flat Rate USA on orders up to $49

Out of Stock

Product Description

See the rest of our shower head section. If you have a shower head from before 1980, you might be using as many as 6 1/2 gallons each minute! Even showerheads from between 1980 and 1994 will use 3 1/2 gallons per minute, and most showerheads from 1994 until now use 2 1/2 gallons per minute. More water doesn't really mean a better shower! It means that you are wasting tens of thousands of gallons of water per year, and you are paying higher energy bills to heat all that hot water. You'll be thrilled with the quality of your shower, and even happier that a family of four can save 14,000 gallons of water in the first year alone over an already efficient 2.5 GPM showerhead. That means it will save you up to $100 each year in reduced water and energy costs from heating up and using hot water. Do you have an older showerhead? Then you'll save even more! Water use is a serious environmental issue, and switching to a more efficient shower head is an effortless way to save thousands of gallons per year of water from going down the drain. You might be saying, "Sure, I could save some money and help the environment, but I don't want to give up a good shower." The good news is that you don't have to! This showerhead uses a patented technology based on the Venturi Principle. As water goes into the base of the shower head, it is propelled through an accelerator fin to increase the velocity of the water flow. It's then directed through a channel where oxygen is injected into water. The result, is a terrific shower. Another side benefit to one of these showerheads is that it makes your hot water last a lot longer, because you are using less water per minute. Do you have someone in the house who takes long showers and uses up all the hot water so that no one else can take a good shower? This shower head will make a dramatic difference! If that wasn't already reason enough to buy the showerhead, there is still another design advantage that makes this 1.5 GPM shower head better than any other shower head you might consider. It doesn't clog! Don't let mineral deposits and hard water get the best of you. The single orifice design of this Oxygenics 1.5 gpm shower head, coupled with internal components made of non-stick Delrin are no match against common "shower cloggers." There isn't a calcium deposit or sediment that will stand in the way. By using the special non-stick material inside the showerhead called Delrin, the shower stays clear of mineral deposits and keeps flowing just like the day you install it.

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Customers also viewed