See the rest of our shower head
The NEW Road Runner II eco-friendly 1.5 gallon per minute showerhead
offers a new way to warm up your shower without wasting water.
Mornings are busy for everyone! We often start the shower, and in waiting for the water to warm up, we run around trying to get other things ready for the day. With this shower head, you no longer have to start your shower and wait impatiently for the water to warm up, putting your tester big toe in to check the temperature. Note: This is not compatible with tankless heater systems
This showerhead has a built-in ShowerStart technology sensor that senses when the water is warm enough to shower
. When you turn on your shower, it senses when the water reaches normal bathing and showering temperature (95 degrees) then “pauses” the flow of water, retaining instead of wasting your hot water. You will hear the water stop running and know your shower is ready. When you are ready to get in, jump in and pull the cord to resume water flow.
With the shower head, you can conserve water and energy without sacrificing comfort
. Why spend money to heat up water that is wasted down the drain? Instead, you can save water and cut your energy bill too. Unlike other low flow showerheads, these nozzles won’t chill the water by mixing in ambient air. You will save about 8 gallons or water for every 5 minutes you shower
– saving you more than other low-flow showerheads.
It is estimated that with this shower head, a family of 3 will save more that $230 on utility bills
and more than 7,600 gallons of water per year. The showerhead will pay for itself in less than 3 months, and doing your part never felt so good.Road Runner Shower Head Product Details:
54 nozzle, full face spray pattern
Wide coverage pattern
Solid brass fittings
Anti-clog spray nozzels
Integrated ShowerStart technology
Note: This is not compatible with tankless heater systemsSpecifications:
Trickle/savings mode activated when water reaches 95° F (35° C)
Automatically resets after each shower
Attaches to any shower arm with industry standard 1/2“ fittings
3" diameter head
Single function spray pattern
Flow rate of 1.5 gpm at 80psi
Chrome polish finish