The Brill Razorcut 38 assembles quick and easy. In fact, assembly is so easy, it is shown in this video at just over 2 minutes. This allows you to get to mowing the lawn quicker, which allows you go get to relax quicker.
How to assemble the Brill Razorcut 38:Start with the arm. Remove the screw from the top.
After unscrewing, take the handle bars. Put the arm between the handle bars, put the screw through, and tighten it back down.
Repeat this process on the bottom of the arm for the parts that will attach to the bottom of the mower.
Attach the handle to the base of the Brill. To do this, secure the Brill, make sure the blades do not rotate around and place the handle attachment down into position over the sockets.
Place wire into guides on the side of the handle. It will snap into place on both the top and bottom of the handle. There is a third clip that may be at the bottom as well. Just snap it into place.
Place the battery in the raised compartment on top of the Brill by sliding the battery into place and resting the strap in the adjoining compartment.
As stated, assembly is easy. You can do it. Your mom can do it. Your neighbor can do it. The neighbor's kids can do it. Check out the Brill Razorcut 38 and all of our other Electric Mowers today!